GENERAL INFORMATION
This product must be installed by a qualified plumber.
Not suitable for use with gravity-fed systems.
To ensure optimum performance and customer satisfaction please adhere to the following:
Flush out all pipe work prior to installation.
Installation should comply with relevant local authority requirements
-Maximum hot water temperature 75C
-Recommended minimum working pressure 150kPa.
-Recommended maximum working pressure 500kPa.
If water pressure exceeds or is likely to exceed 500kPa, an approved pressure limiting valve must be fitted.
If the water temperature exceeds 75C, an approved tempering valve must be fitted.

The post High Body Basin Tap Mixer 03-1359-4-150S appeared first on Jerry Kitchen & Bath Ltd.

Please instruct us the finish you would like after purchase.

GENERAL INFORMATION
This product must be installed by a qualified plumber.
Not suitable for use with gravity-fed systems.
To ensure optimum performance and customer satisfaction please adhere to the following:
Flush out all pipe work prior to installation.
Installation should comply with relevant local authority requirements
-Maximum hot water temperature 75C
-Recommended minimum working pressure 150kPa.
-Recommended maximum working pressure 500kPa.
If water pressure exceeds or is likely to exceed 500kPa, an approved pressure limiting valve must be fitted.
If the water temperature exceeds 75C, an approved tempering valve must be fitted.

The post Kitchen Mixer 04-7360-149S appeared first on Jerry Kitchen & Bath Ltd.

GENERAL INFORMATION
This product must be installed by a qualified plumber.
Not suitable for use with gravity-fed systems.
To ensure optimum performance and customer satisfaction please adhere to the following:
Flush out all pipe work prior to installation.
Installation should comply with relevant local authority requirements
-Maximum hot water temperature 75C
-Recommended minimum working pressure 150kPa.
-Recommended maximum working pressure 500kPa.
If water pressure exceeds or is likely to exceed 500kPa, an approved pressure limiting valve must be fitted.
If the water temperature exceeds 75C, an approved tempering valve must be fitted.

The post HIgh Level Basin Mixer 11K-106 appeared first on Jerry Kitchen & Bath Ltd.

The post Basin Mixer 16L-301 appeared first on Jerry Kitchen & Bath Ltd.

The post High Level Basin Mixer 16N-301 appeared first on Jerry Kitchen & Bath Ltd.

The post Basin Mixer – 6228 appeared first on Jerry Kitchen & Bath Ltd.

GENERAL INFORMATION
This product must be installed by a qualified plumber.
Not suitable for use with gravity-fed systems.
To ensure optimum performance and customer satisfaction please adhere to the following:
Flush out all pipe work prior to installation.
Installation should comply with relevant local authority requirements
-Maximum hot water temperature 75C
-Recommended minimum working pressure 150kPa.
-Recommended maximum working pressure 500kPa.
If water pressure exceeds or is likely to exceed 500kPa, an approved pressure limiting valve must be fitted.
If the water temperature exceeds 75C, an approved tempering valve must be fitted.

The post Pull-out Kitchen Tap Mixer JT01016 appeared first on Jerry Kitchen & Bath Ltd.

Please instruct us the finish you would like after purchase.

GENERAL INFORMATION
This product must be installed by a qualified plumber.
Not suitable for use with gravity-fed systems.
To ensure optimum performance and customer satisfaction please adhere to the following:
Flush out all pipe work prior to installation.
Installation should comply with relevant local authority requirements
-Maximum hot water temperature 75C
-Recommended minimum working pressure 150kPa.
-Recommended maximum working pressure 500kPa.
If water pressure exceeds or is likely to exceed 500kPa, an approved pressure limiting valve must be fitted.
If the water temperature exceeds 75C, an approved tempering valve must be fitted.

The post Basin Mixer JT01044 appeared first on Jerry Kitchen & Bath Ltd.